|
|||||||
| Notices | |
| American Spearguns Discuss American Spearguns in here |
 |
|
|
LinkBack | Thread Tools |
|
#1
March 28th, 2007
|
||||
|
||||
well, in my garage i also had a biller 32 and wanted to make some changes. i ordered up some titanium tubing from a supplier for a really fair price and started drilling away with my 1" brad point bit on my lathe. the stock of the gun is mahogany so it was just like the other gun but the shape of the wood was different. the ti tubing is 1" OD and .036 wall thickness. i need to make a delrin muzzle and use a jbl tru glide rail on this. It will use line drilled freeshafting 42" flopper shafts from ray odor and two 5/8ths bands, i will make them longer so it will be easier to load. like a long reef gun.
so far:
__________________
my guinea pig eats his own poops.  http://www.geocities.com/slidertechn...chnologyA.html 
|
|
#2
March 30th, 2007
|
||||
|
||||
just about done, i decided to use a eurohandle. ti rail, tru glide track, home made muzzle / open.
__________________
my guinea pig eats his own poops. http://www.geocities.com/slidertechn...chnologyA.html
|
|
#3
March 30th, 2007
|
||||
|
||||
hitjohn,
There isn't really much left of the original Biller gun to refer to it as a "Remodeled Biller 32". I would simply refer to it as a custom (homemade) gun that happens to utilize a part that came from a Biller gun. Nicely done. Please let us know how it shoots! Jim P.S. In case you misplaced two kilos of cocaine, they are sitting under the table next to the leg!  Last edited by jimdoe2you; March 30th, 2007 at 14:14.
|
|
#4
March 30th, 2007
|
||||
|
||||
Quote:
__________________
"DeeperBlue.net Regional Advisor".
|
|
#5
March 30th, 2007
|
||||
|
||||
I agree, after seeing the parts I had laying around in the garage from some other guns i thought it would be cheaper to use what i have and the safts already there as well. since ling cod season opens this sunday i'll take the gun out for a whirl and let you know how it works.
about the white packs under the table, pretend you didnt see em: )
__________________
my guinea pig eats his own poops. http://www.geocities.com/slidertechn...chnologyA.html
|
|
#6
March 30th, 2007
|
||||
|
||||
wow, i just saw my place is a mess, excuse the oyster crackers on the table, that was dinner last night.
__________________
my guinea pig eats his own poops. http://www.geocities.com/slidertechn...chnologyA.html
|
|
#7
March 30th, 2007
|
||||
|
||||
Looks very nice.
__________________
Fish Hard!
|
|
#8
April 24th, 2007
|
|||
|
|||
what did you use to make that muzzle ?
|
|
#9
April 24th, 2007
|
||||
|
||||
Quote:
i used a 1/4" round file to make the channel for the shaft. the pins are made with the pins form stainless rivets. its simple but works well. i was going to use uhmw but found making it out of delrin was a lot easier. uhmw took forever to file a channel in. take care! john
__________________
my guinea pig eats his own poops. http://www.geocities.com/slidertechn...chnologyA.html
|
